Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Northeast Philadelphia Homeowners
If your energy bills climb while some rooms never quite heat or cool, leaking ducts are often the reason. In Northeast Philadelphia’s older rowhouses and mid-century splits, the original duct runs behind plaster walls and above drop ceilings have spent decades expanding, contracting, and pulling apart at the joints. We handle duct repair & sealing for homeowners and property managers who want the leaks found and closed, not guessed at. Our technicians have up to 14 years of experience and use contractor-grade Rotobrush and Nikro equipment to inspect and document what’s actually happening inside your system. Same-day service is often available when you call (833) 508-9983. One flat price per system is agreed before any work starts, with before-and-after photos of your own ducts.
What Our Duct Repair & Sealing Service Includes
Duct repair and sealing treats the ductwork as a system. We look at every joint, seam, boot, and connection, then fix what’s failed and seal what’s leaking. Here’s what each part of the work covers.
Duct Sealing
Duct sealing closes the gaps that let conditioned air escape before it reaches a register. You need it when rooms are uneven, the system runs long, or dust keeps settling after a cleaning. We seal joints and seams across the accessible duct runs so the air your HVAC system produces actually reaches the rooms it’s meant to serve.

Flex Duct Repair
Flex duct is the corrugated silver tubing common in attic and crawlspace runs and in conversions across Northeast Philadelphia. It tears, kinks, and sags over time, and a crushed section chokes airflow to whatever room sits at the end of it. We repair or replace damaged sections and reroute runs that were installed with sharp bends that restrict airflow.

Metal Duct Repair
Sheet metal duct is built to last, but its joints separate and its seams open as a house settles. You’ll notice it as whistling at registers, vibration, or a rattle when the blower kicks on. We reattach separated sections, reseal open seams, and reinforce connections that have worked loose.

Duct Insulation
Bare ducts running through an unheated attic or crawlspace lose heat before the air arrives. Duct insulation wraps those runs so the air stays at temperature. We assess which runs need insulation and fit it to the ducts that actually lose heat, rather than wrapping everything without a reason.
Mastic Sealant
Mastic is a brush-on sealant that bonds to metal and stays flexible, and it’s the standard for permanent duct sealing. Duct tape dries out and peels within a few seasons; mastic doesn’t. We apply mastic at joints, seams, and connections for a seal that holds through the seasonal swings this region gets.
Air Leak Repair
Air leak repair is the diagnostic side of the job: finding where the system loses air. Leaks hide at plenum connections, behind registers, at boot-to-floor junctions, and along the trunk line. We trace them and repair each one, so the fix addresses the actual problem instead of a guessed-at one.
Because leaks and contamination usually travel together, many customers pair this work with air duct cleaning in Northeast Philadelphia so the system is sealed and clean in the same visit.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
We work with Honeywell and Aprilaire air-quality components as part of a complete duct system, which matters because sealing and filtration have to work together. When a Honeywell or Aprilaire filter or humidifier connection sits in the middle of a leaking duct run, sealing the run without accounting for that equipment just moves the problem. We understand how those components tie into the ductwork and where their connections tend to fail.
Rotobrush and Nikro are the equipment names behind our duct work. Rotobrush’s rotary brush reaches into duct runs that handheld tools can’t, and Nikro equipment is built for commercial-level cleaning and inspection. That combination tells us what shape your ducts are in before we seal anything, which is the difference between a repair that lasts and one that fails by the next heating season. Whether your system runs Honeywell, Aprilaire, or any other make of air-quality equipment, we can help.
Signs You Need Duct Repair & Sealing Right Now
Duct problems rarely announce themselves. These are the signals worth acting on.
- Rooms that never get comfortable. If the bedroom above the garage stays cold while the living room overheats, air is escaping before it reaches the register. Sealing the leaks usually evens out the difference.
- Rising energy bills with no other explanation. A leaking duct system makes your HVAC equipment work harder for the same result. When nothing else has changed but the bill keeps climbing, the ducts are a likely cause.
- Dust that returns within days of cleaning. Leaky return ducts pull attic or crawlspace air, and whatever is in that air, straight into your living space. Sealing the returns stops the source.
- Whistling, rattling, or vibration at the registers. Noise at a register often means a joint has separated or a seam has opened. It’s a small repair now and a bigger one if the duct run keeps flexing.
- Visible tears, crushed sections, or disconnected runs. A crushed flex run or a duct hanging loose in the attic restricts airflow and should be repaired before the equipment strains against it.
Our Duct Repair & Sealing Process – Step by Step
Here’s how the work actually goes, from first inspection to final check.
- 1
Inspection and leak mapping. We inspect the accessible duct system with Rotobrush and Nikro equipment and look at every joint, seam, and connection. We photograph what we find so you’re looking at the same evidence we are.
- 2
Written estimate, one flat price. You get a written estimate covering the whole system, not a per-vent count. The price is agreed before any work begins, and there are no add-ons once the technicians are on site.
- 3
Repair of failed sections. Torn flex runs get repaired or replaced. Separated metal sections get reattached and reinforced. Crushed runs get rerouted so airflow isn’t fighting a sharp bend.
- 4
Sealing with mastic and insulation. Joints and seams get sealed with mastic, and exposed runs in unconditioned space get insulated. This is where most of the energy savings come from.
- 5
Final check and photos. We verify the seals and airflow, then share before-and-after photos of your ducts so you can see exactly what changed. If anything doesn’t look right, we address it before we leave.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Northeast Philadelphia?
Duct repair and sealing in Northeast Philadelphia typically runs from about $350 to $1,400 depending on how much of the system needs work, and the written estimate sets the final price. These are estimated ranges for typical scenarios, not fixed rates.
- Targeted air leak repair: roughly $350 to $650 for sealing a handful of accessible leaks at joints and connections.
- Flex duct repair or replacement: roughly $450 to $900 depending on how many runs are damaged and how hard they are to reach.
- Metal duct repair and resealing seams: roughly $500 to $1,100 depending on the length of the trunk line involved.
- Full-system sealing with mastic plus duct insulation: roughly $800 to $1,400 depending on the number of runs and how much duct sits in unconditioned space.
What affects the price: how much duct is accessible, whether the work is in an attic, crawlspace, or between floors, how many separate leaks need sealing, and whether insulation is needed alongside the sealing. A system with one separated joint costs far less than a house where every flex run in the attic tore.
The way to avoid overpaying is to get one flat price per system in writing before work starts and to ask for photos of the leaks found. What’s included in a free estimate: the inspection, the leak findings, the written price, and a clear explanation of what will be repaired versus replaced. Call (833) 508-9983 for an exact quote; estimates are free.
Duct Repair & Sealing Near Northeast Philadelphia – Our Service Area
We connect homeowners and property managers across Northeast Philadelphia and the surrounding neighborhoods with local duct professionals, including Olney, Oak Lane, Logan, Port Richmond, Hunting Park, Mount Airy, Germantown, Chestnut Hill, East Falls, Bustleton, and Rhawnhurst. Response times depend on where you are and how booked the day is, so call and we’ll book the soonest opening. If you’re in Olney or Oak Lane, you can read more about duct repair & sealing or duct repair & sealing for those neighborhoods.
Serving Northeast Philadelphia, PA – Our Local Coverage Area
We serve Northeast Philadelphia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Northeast Philadelphia
Duct repair and sealing means fixing physical damage to the ductwork and closing the gaps where conditioned air escapes. That covers torn or crushed flex duct, separated metal sections, and open joints and seams sealed with mastic. The goal is a duct system that delivers air where it’s supposed to go instead of leaking it into an attic or wall cavity.
Most residential duct repair and sealing jobs take a few hours to a full day, depending on how much of the system is involved. A handful of targeted leaks moves quickly; a full run of flex duct replacement in an attic takes longer. The written estimate gives you a realistic time window before anything starts.
Most duct repair and sealing jobs in Northeast Philadelphia fall between roughly $350 and $1,400, depending on the type of repair and how much duct is affected. Small leak repairs sit at the low end, while full-system sealing with insulation sits at the high end. Call (833) 508-9983 for an exact quote; estimates are free.
Yes, we work with Honeywell air-quality equipment as part of the duct system, along with Aprilaire components. If a Honeywell or Aprilaire filter or humidifier connection sits near a leaking duct run, we account for it when sealing so the fix holds. Whether your system uses Honeywell, Aprilaire, or another make, we can help.
Same-day service is often available, though it depends on the day and your location. Call (833) 508-9983 and we’ll book you into the soonest opening. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
We stand behind the work and will put the details in writing with your estimate so you know what’s covered. Ask about coverage for your specific job when you call, since it depends on what’s being repaired. We’d rather you ask up front than wonder later.
Clear access to any attic hatch, crawlspace entry, or closet that covers ductwork, and move anything fragile out of the way near registers. If you can point out the rooms that never feel right, that helps direct the inspection. Beyond that, you don’t need to do anything special.
Schedule Your Duct Repair & Sealing Service in Northeast Philadelphia Today
Leaking ducts cost you comfort and money every month they go unrepaired. We’ll inspect the system, show you what we find, and give you one flat price per system before any work begins, with a free estimate and before-and-after photos of your ducts. Call (833) 508-9983. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Northeast Philadelphia.